Riboflavin Sodium Phosphate Supplier
Bulk Riboflavin Sodium Phosphate, also referenced as Riboflavin 5′-Phosphate Sodium, supplied with a defined analytical specification covering riboflavin assay, related substances and batch-specific quality data.
Riboflavin Sodium Phosphate Product Overview
The batch specification identifies the material through fluorescence together with reactions for sodium and phosphate.
Identity & Physical Profile
USP distinguishes an anhydrous sodium salt and a dihydrate form. This distinction matters because hydrate state changes molecular weight and should not be inferred from a product specification when the commercial specification does not state it. FCC describes the material as a fine orange-yellow crystalline powder that is hygroscopic and substantially more water-soluble than standard Riboflavin.
Phosphate Sodium Derivative
The phosphate group and sodium counterion distinguish this material chemically from standard Riboflavin.
Water-Soluble Form
Approximately 1 g dissolves in about 30 mL of water under the FCC description.
Hygroscopic & Light-Sensitive in Solution
The material is hygroscopic, and solutions are sensitive to light exposure.
Understanding the Riboflavin Assay Basis
Assay is expressed as riboflavin content calculated on a dry basis. It should be interpreted on that defined basis rather than relabeled as generic product purity.
Riboflavin Sodium Phosphate Specification & Batch Results
Acceptance criteria and certified batch results are presented side by side for direct analytical review.
| Test Item | 사양 | Batch Result |
|---|---|---|
| Identity & Physical Properties | ||
| 설명 | Yellow to orange-yellow crystalline powder | 준수 |
| Fluorescence Test | Pale greenish-yellow by transmitted light; intense yellowish-green fluorescence under long-wave UV disappears upon addition of mineral acids or alkalies | 준수 |
| Sodium & Phosphate | Filtrate gives reactions of sodium and phosphate | 준수 |
| Specific Optical Rotation | +37.0° to +42.0° | +39.6° |
| pH of 1.0% Solution | 5.0–6.5 | 6.0 |
| Lumiflavin | Absorbance ≤0.025 | 0.001 |
| Sulphated Ash | ≤25.0% | 21.9% |
| 건조 시 손실 | ≤7.5% | 5.4% |
| Related Substances | ||
| Free Riboflavin | ≤6.0% | 4.1% |
| Riboflavin Diphosphate | ≤6.0% | 3.1% |
| Inorganic Phosphate | ≤1.0% | 0.23% |
| Elemental / Heavy Metal Controls | ||
| Heavy Metals (as Pb) | ≤10 ppm | <10 ppm |
| 카드뮴 | ≤1 ppm | <0.005 ppm |
| 비소 | ≤1 ppm | <0.01 ppm |
| 리드 | ≤2 ppm | <0.02 ppm |
| 수은 | ≤0.1 ppm | <0.005 ppm |
| 분석법 | ||
| Riboflavin on Dry Basis | 73.0%–79.0% | 75.4% |
| Residual Solvents | ||
| Methanol | ≤3000 ppm | 55 ppm |
| Acetonitrile | ≤410 ppm | 3 ppm |
| Pyridine | ≤200 ppm | 5 ppm |
| Microbiological Quality | ||
| Total Aerobic Microbial Count | ≤1000 CFU/g | <100 CFU/g |
| 효모 및 곰팡이 | ≤100 CFU/g | <10 CFU/g |
| 대장균 | Absence/g | Not Detectable |
| 살모넬라 | Absence/g | Not Detectable |
| 황색포도상구균 | Absence/g | Not Detectable |
Riboflavin Sodium Phosphate Quality Evaluation
Quality evaluation extends beyond assay to related substances, residual solvents, elemental impurities and microbiological controls. Together, these parameters provide a broader analytical profile for the material.
Riboflavin Sodium Phosphate vs. Riboflavin
The distinction starts with product identity and continues through the assay basis and analytical profile.
| Selection Point | Riboflavin Sodium Phosphate | 리보플라빈 |
|---|---|---|
| Chemical form | Phosphate sodium derivative | Unphosphorylated Riboflavin |
| Water behavior in established physical-property data | Water-soluble; FCC reports about 1 g in 30 mL | Very slightly soluble |
| Moisture behavior | Described by FCC as hygroscopic | No hygroscopic designation used in the cited FCC description |
| Analytical profile in batch specification | Includes related substances, residual solvents and microbiological controls | Includes a defined particle-size requirement |
| 분석 결과 해석 | Expressed as riboflavin content for the phosphate sodium material | Assay applies to standard Riboflavin |
Packaging, Storage & Batch Traceability
Store in a well-closed container protected from light and moisture. Batch traceability includes manufacturing, retest and packing information.
Request Riboflavin Sodium Phosphate Pricing & Supply Information
Send your required quantity and destination market to request current pricing and product information for Riboflavin Sodium Phosphate.
문의 보내기
Share your company name, required quantity and destination market.